How to Replace the Oven Door on the ILVE Majestic II Range
Whether you’re replacing the oven door or performing a deep clean, knowing how to properly remove and reinstall the oven door on your ILVE Majestic II range is essential. This step-by-step guide ensures a smooth and safe process with minimal effort.
Whether you’re replacing the oven door or performing a deep clean, knowing how to properly remove and reinstall the oven door on your ILVE Majestic II range is essential. This step-by-step guide ensures a smooth and safe process with minimal effort.
Tools Required
- Pliers
- A second person for support (optional)
Step-by-Step Replacement Process
- Extend the Warming Drawer and Open the Oven Door
- Start by pulling out the warming drawer below the oven, then fully open the oven door.
- Unlock the Door Hinges
- Using a pair of pliers, pull both hinge locks toward the oven door to release.
- Remove the Oven Door
- Raise the oven door to approximately a 45-degree angle, then lift up and toward you. It should detach easily.
- Install the New Oven Door
- Using the same 45-degree angle and motion, align and insert the new oven door into the hinge slots.
- Fully Open the Door
- With the warming drawer still extended, pull the oven door completely open.
- Secure the Hinge Locks
- Use pliers to push the hinge locks down toward the oven door until they are fully latched.
- Test the Door
- If the door opens and closes smoothly with no resistance, the installation was successful.
Final Recommendations
- Refer to the full ILVE installation manual for clearance requirements and connection guidelines.
- Always hire a licensed professional for gas and electrical installations.
- Register your ILVE Panoramagic online to activate your warranty and receive product support.
Need further assistance? Visit us.ilve.com or contact our support team.
