How to Unbox and Install ILVE Majestic II Range

September 18, 2024

Learn how to unbox and install the legs on your ILVE Majestic II Range in 14 easy steps. Follow our simple guide for a smooth setup and ensure your range is ready for cooking!

The ILVE Majestic II Range blends timeless European elegance with powerful, professional-grade cooking performance. To help you get started the right way, this step-by-step installation guide walks you through unboxing and setting up your Majestic II Range safely and correctly.

Whether you’re an installer, contractor, or homeowner preparing for your kitchen upgrade, following these steps will ensure a smooth and damage-free installation process.

Tools Required

Crowbar
Screwdriver
Pliers
Two people for lifting
Cardboard or protective padding

Step-by-Step Replacement Process

Loosen the wooden crate
Use a crowbar to carefully loosen the wooden crate surrounding the range.
Lift and remove the crate.
With assistance, lift and remove the crate to reveal the appliance.
Remove the cardboard.
Peel away all cardboard packaging covering the unit.
Take off the plastic wrapping.
Remove all plastic wrapping from the exterior of the range.
Disassemble the grates and burner caps.
Take off the cooktop grates and burner caps to avoid movement or damage during handling.
Remove the drawer.
Slide out and set aside the bottom drawer of the unit.
Detach the oven doors.
Use a screwdriver or pliers to carefully remove both oven doors. This will lighten the unit for safer handling.
Remove all accessories from inside the ovens.
Take out racks, trays, and any other accessories from both ovens.
Note: Ensure the range is completely empty before moving forward.
Place packaging cardboard for protection.
Lay a piece of the cardboard behind or beneath the unit to protect surfaces while handling.
Check for a proper grip.
Before lifting or tilting the range, ensure you have a stable and secure grip.
Rotate the unit with assistance.
With another person, carefully rotate the range onto its back or side to access the underside.
Remove temporary supports.
Remove any temporary feet or transport supports attached to the base.
Install the adjustable feet.
Retrieve the legs from the kit and assemble them per the provided instructions.
Tighten the feet securely.
Make sure each leg is fully tightened and stable.
Remove the pallet.
Lift the appliance slightly and slide out the pallet from beneath.
Lift carefully to avoid damage.
When lifting or repositioning the range, avoid placing full weight on the legs to prevent bending or breakage.
Position the unit in place.
Gently move the appliance to its final location in the kitchen layout.
Reattach all components.
Finish the process by reinstalling the oven doors, drawer, cooktop grates, and burner caps.

Final Recommendations

Refer to the full ILVE installation manual for clearance requirements and connection guidelines.
Always hire a licensed professional for gas and electrical installations.
Register your ILVE Range online to activate your warranty and receive product support.

Need further assistance? Visit us.ilve.com or contact our support team.