How to Replace an Oven Door on ILVE Nostalgie, Professional Plus and Panoramagic Ranges
Replacing an oven door can be done in just a few minutes with basic tools and careful handling.
Need to replace the oven door on your ILVE range? Whether you’re performing a repair or installing a new door, this quick guide will walk you through the process for the Nostalgie, Professional Plus, and Panoramagic models.
Replacing an oven door can be done in just a few minutes with basic tools and careful handling.
Tools Required
- Phillips screwdriver
- Pliers
- New ILVE-compatible oven door
Step-by-Step Replacement Process
-
Open the oven door to a 90-degree angle.
This position gives you access to the hinge and mounting screws. -
Remove the two screws from the hinges.
Use a screwdriver to remove the screws securing the door to the hinge arms. -
Release the hooks.
Using pliers, gently unhook the door from the hinge mechanism. -
Remove the old door.
Carefully lift the door off the hinges and set it aside. -
Slide the new door into the guides.
Align the hinges of the new door with the tracks and slide it into place. -
Secure the hooks.
Lock the door onto the hinge arms using the hooks. -
Reinstall the screws.
Tighten the two screws to secure the new oven door.
Final Recommendations
- Refer to the full ILVE installation manual for clearance requirements and connection guidelines.
- Always hire a licensed professional for gas and electrical installations.
- Register your ILVE Range online to activate your warranty and receive product support.
Need further assistance? Visit us.ilve.com or contact our support team.
