How to Unbox and Install ILVE Nostalgie II & Professional Plus II Range

May 22, 2025

Investing in an ILVE Nostalgie II or Professional Plus II Range is an exciting upgrade for your kitchen—and how to unbox and install ilve nostalgie ii & professional plus II ranges properly is the first step to enjoying its world-class performance. This guide walks you through the step-by-step process to ensure your range is unpacked and installed with care and precision

Investing in an ILVE Nostalgie II or Professional Plus II Range is an exciting upgrade for your kitchen—and unboxing and installing your new appliance properly is the first step to enjoying its world-class performance. This guide walks you through the step-by-step process to ensure your range is unpacked and installed with care and precision.

Tools Required

Crowbar
Screwdriver
Pliers
Two-person lift assistance
Protective gloves (optional, for handling metal parts)

Step-by-Step Replacement Process

Open the wooden crate.
Use a crowbar to gently loosen the wooden crate from the base.
Lift and remove the crate.
With the crate loosened, carefully lift and remove it to reveal the appliance.
Remove the cardboard.
Strip away any remaining cardboard packaging to begin accessing the range.
Take off the plastic wrapping.
Peel off the protective plastic wrap to expose the exterior finish of your ILVE range.
Disassemble grates and burners.
Remove the top grates and burners to avoid damage during handling.
Remove the drawer.
Slide out the drawer at the bottom of the range and set it aside.
Detach the oven doors.
Using a screwdriver or pliers, remove the oven doors to make the unit lighter and easier to maneuver.
Remove accessories from inside.
Take out all racks, trays, and accessories from inside both ovens.
Important: Make sure the interior of the unit is completely empty before proceeding.
Prepare a protective base.
Place a piece of the cardboard packaging on the floor to protect your floors and the appliance during movement.
Check for a secure grip.
Before lifting, ensure you have a firm, balanced grip on the unit.
Rotate the kitchen unit (with help).
With the help of another person, carefully rotate the range onto its back or side as needed to access the bottom.
Install the feet.
Remove the feet from the accessory kit and install them according to the included instructions.
Tighten the feet.
Ensure each foot is securely tightened to provide a stable base for the appliance.
Remove the pallet.
Once the feet are in place, lift the range slightly and slide out the wooden pallet beneath it.
Lift carefully.
When lifting the unit, avoid placing full weight on the feet to prevent bending or damage.
Move into position.
Carefully move and place the unit into its final installation location in your kitchen.
Reattach components.
Finally, reinstall the oven doors, drawer, burners, and grates to complete the setup.

Final Recommendations

Refer to the full ILVE installation manual for clearance requirements and connection guidelines.
Always hire a licensed professional for gas and electrical installations.
Register your ILVE Range online to activate your warranty and receive product support.

Need further assistance? Visit us.ilve.com or contact our support team.