Tools Required:

1.Crowbar, pry bar, or hammer 2. Protective mat 3. cutting implemtent(knife, scissors, etc. 4. Wrench 5.Screwdriver
Step 1: With a crowbar, pry bar, or Hammer, pull apart the protective wood planks from their joints. Do this completely before removing each side of the wooden frame.
Step 2: Pull the bottom of the outer cardboard box from the staples securing it to the inner box and lift it off.
Step 3: Remove the protective covering from the range.
Step 4: Remove the grates, burners, and accessories from the cooktop.
Step 5: Remove the racks, trays, and legs from the inside the oven.
Step 6: To remove the oven door, unlatch the loks where the door attaches to the range. Raise it to a 75- degree angle and pull the door off.
Step 7: Carefully cut the front corners of the protective cardboard and lay it down and out of the way.
Step 8: Fully extend the drawer and unlatch it from the tracks. Remove the front panel, then lift the drawer off the track.
Step 9: Place the protective mat on the ground and, with a partner, carefully lift the range completely free of its container. Put the container remains aside and the lay the range on its back.
Step 10: With the wrench, remove the floor guards.
Step 11: Use the screwdriver to attach the legs to the range. Each leg requires 3 screws, once complete. Reattach the floor guards to the legs.
Step 12: Place the burners and grates in their designated positions.
Step 13: Replace the drawer on the tracks, making sure it is latched, and then reattach the front panel.
Step 14: Reinstall the oven door by placing the hooks in their designated slots and latching it securely.