Tools Required: Protective mat, Screwdriver

Step 1: Place a protective mat on the ground.
Step 2: Open the door approximately 45 degrees & locate the two screws on the side of the oven door
Step 3: Remove the casing holding the 2 glass panes.
Step 4: With the door open, lift and remove the first glass pane.
Step 5: To remove the middle glass pane, pull it out firmly, but steadily. If there is some resistance, alternate pulling between the sides of the pane.
Step 6: To re-install the glass, place it within the ridges and slide it in completely.
Step 7: When placing the casing, make sure it secures both glass panes.
Step 8: With proper installation, the door should smoothly open and close.